DIY Fog Chiller Setup
Create your own fog chiller for Halloween displays using a standard fog machine, cooler, and PVC pipe setup. Perfect for keeping fog low to the ground for that spooky, professional look!
Quick Steps
- Cut two holes into a plastic cooler—one for the fog machine hose and one for the PVC outlet.
- Fill the cooler with ice or dry ice (do not add ice directly inside the fog machine).
- Connect the fog machine output hose to the cooler inlet hole.
- Attach PVC pipe to the cooler outlet to guide fog along the ground.
- Turn on the fog machine and enjoy a chilling low-lying fog effect!
💡 Pro Tip
For best results, use dense or low-lying fog fluid — Buy Fog Fluid — and run the machine outdoors on cool, calm evenings.
⚠️ DIY Disclaimer & Safety Notice:
This project involves modifying and using electrical devices and heat-producing equipment (fog machines). Proceed at your own risk. Ensure all electrical components remain dry and use only in well-ventilated areas. zurchersshop.com provides this guide for educational and entertainment purposes only. By attempting this project, you accept full responsibility for any outcomes, damages, or injuries that may occur. Always follow manufacturer instructions for your fog machine and never alter internal components.
This project involves modifying and using electrical devices and heat-producing equipment (fog machines). Proceed at your own risk. Ensure all electrical components remain dry and use only in well-ventilated areas. zurchersshop.com provides this guide for educational and entertainment purposes only. By attempting this project, you accept full responsibility for any outcomes, damages, or injuries that may occur. Always follow manufacturer instructions for your fog machine and never alter internal components.
© {{ 'now' | date: "%Y" }} Zurchers Party & Wedding Supply. All rights reserved.
